|
Product Details:
Payment & Shipping Terms:
|
Material: | Galvanized Wire And Stainless Steel Wire | Wire Diameter: | 4.0mm |
---|---|---|---|
Weave Style: | Twist | Size: | 100cmx100cmx100cm ,etc. |
Hole Shape: | Square | Accessories: | Sprial Wire And Bending Wire |
Technique: | Welded | Application: | Gabion Mesh |
Feature: | Corrosion Resistance ,etc. | Tensile Strength: | More Than 380Mpa |
Surface Treatment: | Eletric Galvanized/hot Dipped Galvanized | Aperture: | 60mm*80mm,80mm*100mm,80mm*100mm |
Zinc Rate: | More Than 245g/m2 |
welded Gabion box Materials:
(1). Galvanized steel wire hot dipped galvanized wire welding
hot dipped galvanized after black wire welding
(2). Zinc-aluminum alloy wire (5% aluminum or 10% aluminum)
(3). PVC coated wire, PE coated wire.
specification
Box Size | Mesh Openning(mm) Available | Wire Diameter (mm) &Coating type |
1.0 x 1.0 x 0.5 | 25 x 25 or 50 x 50 or 75 x 75 or 100 x 50 or 100 x 100 Note:For convention the first measurement is the horizontal mesh opening and the second measurement is the vertical mesh opening. This may be reversed but must be specified at the time of order. | For mesh opening up to and including 50mm x 50mm Wire Diameter choice is: 2.0,2.20,2.50,2.70,3.00,4.00 and 5.00 Available with coating: Heavily Galvanized Coating Galfan Zn 5%Al Coating For mesh opening 75mm x 75mm and up to and including 100mm x 100mm. Wire Diameter choice is: 2.50,2.701,3.00,4.00 and 5.00mm. Available with coating: Heavily Galvanized Coating Galfan Zn 5%Al coating Heavily Galvanized Coating + Polymer Coated Galfan Zn 5%Al coating + Polymer coated When product is polymer coated the final overall coated wire diameter is 3.0,3.2,3.5,4.8 and 5.8mm. |
1.0 x 1.0 x 1.0 | ||
2.0 x 1.5 x 0.5 | ||
2.0 x 0.25 x 0.5 | ||
2.0 x 0.5 x 0.5 | ||
2.0 x 1.0 x 0.5 | ||
2.0 x 1.0 x 0.5 | ||
2.0 x 1.0 x 1.0 | ||
3.0 x 1.0 x 0.5 | ||
3.0 x 1.0 x 1.0 | ||
4.0 x 1.0 x 0.5 | ||
4.0 x 1.0 x 1.0 |
Advantages:
1)Avaiable in a range of wire diameters to suit the application.
2)The ability to modify the unit without affecting the integrity of the mesh. Where units require modifying the mesh can be cut back to the next transverse wire which forms the new edge wire.
3)Welded mesh gabions is demensionally stable therefore alignment and deformation are controllable.
4)Easier and higher quality of installation.
Applications of Welded Mesh Gabion Box:
Control and guide of water or flood |
Flood bank or guiding bank |
Preventing of rock breaking |
Water and soil protection |
Bridge protection |
Strengthening structure of soil. |
Protection engineering of seaside area. |
How to install welded gabion box?
Step 1 | Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh. |
Step 2 | Secure panels by screwing spiral binders through the mesh openings in adjacent panels. |
Step 3 | Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells. |
Step 4 | Gabion box is filled with graded stone by hand or with a shovel. |
Step 5 | After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back. |
Step 6 | When stacking tiers of the welded gabion box, the lid of the lower tier may serve as the base of the upper tier. Secure with spiral binders and add pre-formed stiffeners to exterior cells before filling with graded stones. |
1.If you are not sure about this choice,please contact to get a sample for confirm first.
2.If you have a idea on the size,we would like to discuss together for well help.
3.We would like to get any feed back when you are using our product, and any idea will be high appreciated.