Used In Construction Hot Sale Expanded High Rib Lath/Supplier Galvanized steel high rib lath for building

86mm 3/8" High Rib Lath Formwork Metal is made from coils of sheet steel, slit and expanded into a herring bone pattern with metal ribs running about every 3 inches on the long direction of the sheet. This product is typically stapled, nailed or screw applied to the substrate. It can also be tie wire attached to cold rolled grillage. Ex-panded metal lath has diamond shaped openings made in a similar manner as rib lath but without the ribs. It too is attached with staples, nails screws or tie wire. Regardless of the lath being used, weather-resistant barrier paper should be omitted on ceilings and soffits. Strips of paper may be installed to minimize blow-by from a gun-applied scratch coat. These strips do not hold back water in the ceiling. While these strips of paper make it harder to tie wire the lath to the grillage, it is possible.

Quite often, 686mm 3/8" High Rib Lath Formwork Metal flat and 3/8”) is specified for use on framing that doesn’t warrant its use. From table 3 of ASTM standard C 1063, expanded metal lath is approved for use on the underside of horizontal surfaces with framing supports spaced up to 16” on center. Flat rib expanded metal lath can be attached to supports for ceilings and soffits up to 19” on center, and 3/8” high rib can span 24” on center.

Advantages:

1, Filling self-compacting, vibration-free;
2, Pouring Free dismantle Free clean-up;
3, no roughened surface to provide an effective combination;
4, small size, light weight, easy handling;
5, easy to cut, easy to make steel throughout, easy to tie nail;
6 to prevent violent mold, keeping the site clean;
7, and easy drainage mesh, and reinforcing structure;
8, to prevent the concrete surface cracks;
9, labor, material saving, high efficiency;
10, saving template support material.

1.Are you a manufacture?

Yes, we have been in providing the products in this field for 13 years.

2. Is customized available?

Yes, according to your detailed drawings you provide.

3. How many days will the samples be finished? And how about the mass production ?

Generally the samples will be sent immediately by the air express in 3~5 days if the goods are in stock .Normally within 30 days or according to your order .

4. What’s the payment terms?

L/C; T/T; D/P; D/A; Western union; MoneyGram, Paypal