Payment & Shipping Terms:
|Material:||Lower Carbon Steel Wire||Wire Diameter:||1.5-4.60mm|
|Mesh Hole:||6*8cm Or 8*10cm And So On||Used:||River Or Lake|
|Surface Treatment:||Galvanized Or PVC Coated||Shape:||Roll Or Panel|
|Edge Wire:||2.4-4.0mm||Zinc Coated:||40-250g/m2|
|Package:||Plastic Film Package||Weave:||Weave Or Welded|
|Payment:||T/T Or L/C||Mesh Wire:||1.0-6.0mm|
Gabion boxs manufactured from 8x10 double twisted hexagonal woven steel wire mesh, as per ASTM A975-97 Gabions are filled with stones at the project site to form flexible, permeable, monolithic structures such as retaining walls, channel linings, and weirs for erosion control projects. The steel wire used in the manufacture of the gabion is heavily Galfan (zinc-5% aluminum-mischmetal [Zn-5 Al-MM] alloy) coated soft temper steel. A PVC coating is then applied to provide additional protection for use in polluted, contaminated or aggressive environments: in salt, fresh water, acid soil or wherever the risk of corrosion is present. The PVC coating has a nominal thickness of 0.02 in. (0.50 mm). The gabion is divided into cells by diaphragms positioned at approximately 3 ft (0.9m) centers. To reinforce the structure, all mesh panel edges are selvedged with a wire having a greater diameter. Gabions shall be manufactured and shipped with all components mechanically connected at the production facility.
Wire Diameter(PVC Coated)
|The Specification Of Gabion Box|
|2.0m||1.0m||0.5m||1||1.0m3||L +/- 3%|
|3.0m||1.0m||0.5m||2||1.5m3||W +/- 5%|
|4.0m||1.0m||0.5m||3||2.0m3||H +/- 5%|
Gabion box application
1. Control and guide of water or flood
2. Preventing of rock breaking
3. Rock fall protection
4. Water and soil protection
5. Bridge protection
6. Strengthening structure of soil
7. Protection engineering of seaside area.
8. Port project
9. Keep off dust wall
How to install welded gabion box?
Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.
Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.
Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells.
Step 4. Gabion box is filled with graded stone by hand or with a shovel.
Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.
Step 6. When stacking tiers of the welded gabion box, the lid of the lower tier may serve as the base of the upper tier. Secure with spiral binders and add pre-formed stiffeners to exterior cells before filling with graded stones.
Why choose us
1.Professional design team and sales department for your service
2.Alibaba golden supplier,factory recognized by “CE,SGS,BV”
3.7/24 service for you.all the question will be dealed within 24hours.