Payment & Shipping Terms:
|Surface Treatment:||Hot-dipped Galvanized||Size:||0.3m-1.2m Wide, 1m-6m Long|
|Application:||Steel Driveway, Floor||Rod Diameter:||3-10mm|
|Grating Size:||550x1000, 1000x1000||Color:||Silver|
floor grates for decks/non slip metal grating/galvanised walkway panels/steel bargrating load tables/steel grating
1>Material :Mild steel & Low carbon steel, etc.
2>Surface treatment: hot-dipped galvanized, electric galvanized.
1>Bearing bar shapes: plain or serrated or I bar type.
2>Bearing Bar Pitch (center to center): 30, 40, 60mm are recommended,but we can also do it under customer's request.
3>Bearing Bar (Load Bar) Specifications (mm):The specification(thickness of bearing bar)of plain type and serrated type is 20 x 3 to 100 x 10;
4>Cross bar pitch(mm) :38, 40, 50, 60, 76, 80, 100, 110, 120 etc.
For lower cost, we suggest clients use module width, for example: series 1 use 125,155,185,215,245,275mm, series 2 use 125,165,205,245,275mm etc, and for length, it is multiple of 100mm, such as 500,600,700,800,900,1000,1200mm and so on.
Recommended length table:
|Flat Steel section size||25×3||25×5||32×5||40×5|
|“A”(bolt hole center distance)||45||75||75||100||100||150||150|
Front fender:Size 65mm*5mm, or as your requirements
|Series||Series distance||Traverse line distance||Load flat specification|
|series||Series distance||Traverse line distance|
Installation of steel grating:
1.Welding & using saddle clips are two ways for installation of grating. The welding is suitable for those places where there is no need to move or dismental,for instance,the flooring around the machines. However,using saddle clips are featuring in easy installation & saving zinc layer.
2.Regarding welding installation, angle wolding would used at the first bearing bar of every corner,which the welding length is no less than 20mm,&the height is no less than 3mm.
3.Saddle clip composed of a top plate,a hold down & a M8 bolt, is suitable for all kinds of steel gratings installation.
4.Regarding saddle clip installation, at laest four sets of saddle clips would be used in one pc grating.It would be better using more in the staddle for those gratings with a bigger span.
steel grid plate series products application range
|Power plants||Sewage treatment||The ship manufacturing||Municipal engineering||Nuclear power plants||Room of the lacquer that bake|
|Desulfurization tower||Offshore platform||Industrial platform||High tower||Water supply and drainage||The steel structure|
|smelters||Pharmaceutical manufacturing||Painting workshop||Stereoscopic parking||Cement plant||Selected mining|
|chemical plant||Safety protection||Food processing||Storage shelves||Light industry||The scaffold|
The package of galvanized steel grid
galvanized steel grid is normally packed in the way with two pieces of square wood on both upper and bottom sides.there are four or six pieces M10 long bolt penetrating the grids and screwing them together.it is suitable for loading and unloading by forklift.But we also packing our products on costumer’s requirement.
A: Yes,we have specialized in this field for about 10 years experience.
A: Yes,we can provide sample in half A4 size together with our catalogue.
But the courier charge will on your side. We'll send back the courier charge if you make an order.
A: The specification of wire mesh.such as material,mesh number, wire diameter,hole size,width,quantity,finishing.
A: We always prepae enough stock material for your urgent requirement. the delivery time is 7days for all the stock material.
We'll check with our production department for the non-stock items to offer you the exact delivery time and producing schedule.