Payment & Shipping Terms:
|Material:||Galvanized Sheet||Type:||Rib Lath|
18 gauge matal lath/expanded sheet metal mesh/hy rib suppliers/stucco wire mesh installation/lath and stucco
Hi Rib Lath is intended for horizontal applications with its seven longitudinal ribs, each 3/8” deep
and eight small flat ribs to provide additional rigidity. High Rib Lath is the most rigid of all laths and provides the added support required when framing is more than 16”O.C. but does not exceed 24” O.C. It is commonly used for soffits and ceilings under steel or wood joist construction & metal-reinforced concrete floors.
Material:hot-dipped galvanized steel sheets
Specification of hy rib expanded metal lathing:
|Thickness(mm)||mesh(mm)||Rib height(mm)||Rib distance(mm)||kg/m²||Width of panel(mm)|
|Thickness of panel(mm)||
|Rib height(mm)||Rib distance(mm)||
|Width of panel(mm)|
High Rib Lath
1, Filling self-compacting, vibration-free;
2, Pouring Free dismantle Free clean-up;
3, no roughened surface to provide an effective combination;
4, small size, light weight, easy handling;
5, easy to cut, easy to make steel throughout, easy to tie nail;
6 to prevent violent mold, keeping the site clean;
7, and easy drainage mesh, and reinforcing structure;
8, to prevent the concrete surface cracks;
9, labor, material saving, high efficiency;
10, saving template support material.
• With stronger ribs,widely applied to concrete structure of projects
• Used as plaster backing for ceilings,walls, and stud partitions
• Rib lath is also ideal for refurnish damaged or ages masonry walls when a key for rendering is not certain due to disintegration or softening of wall face
• Better stress strength and free shape,used as concrete permanent dismantle free template for civil engineering
• easy to cut and form the plaster work.
• provides ample keying for scratch coat.
•easily used for plaster machine application.
•gives a uniform coat depth for large area
All the sheet hole size, thickness, rib distance, length and width can up to customer requirement.
7 RIBS 8 OPENINGS
5 RIBS 8 OPENINGDS
9 RIBS 4 OPENINGS
1.Are you a trading company or manufacturer?
Manufacturer with factory!
2.Where is your factory?
We are in Hebei Province, Near Beijing, 2 hours by fast train from Beijing
3.What is the Loading Port
Tianjin ,Xingang Port
4. What is your payment Terms?
Usually deposit in advance, the balance after sight of B/L by T/T
5.How you pack the products
10sheets/bundles with steel pallet, or carton boxes with steel pallet